Adhesives,
Repairs and surface Treatment |
| SETCRETE
SB |
WATER
PROOF ACRYLIC MODIFIER AND BONDING AGENT FOR CEMENTITIOUS
MIXES. |
Excellent
bonding with most building materials .Outstanding
water resistance. Good chemical/salt resistance.
Increases flexibility.
Dosage:
15 kg + 10 litre water per 50 kg cement. |
| |
|
|
| SETCRETE
TT |
A SINGLE COMPONENT TILE ADHESIVE SUITABLE FOR FIXING
TILES, STONES AND GRANITE INCLUDING TILE ON TILE
|
Good flexibility, resists thermal movement. Can
be used for external cladding of tiles granite
stones. Good bonding even on smooth surfaces.
Waterproof.
Coverage:
25 kg pack covers 5 to 8 sq.m.
|
| |
|
|
| SETCRETE
TA |
A SINGLE COMPONENT CERAMIC TILE ADHESIVE SUITABLE
FOR FIXING TILES ON CONCRETE.CEMENT OR LIME MORTARS.
|
Suitable
for use in damp and totally submerged conditions.
High bond strength Good work and open wet times
of 20 minutes at 35 degree C Coverage
: 25 kg pack covers 5 to 8 sq.m.
|
| |
|
|
| SETCRETE
TP |
A
SINGLE COMPONENT COLOURED GROUT USED FOR POINTING
TILE JOINTS.
|
Gives
bonding suitable for use in wet conditions.No
colour change. Available in different colours.
|
| |
|
|
| QUICKMAST
108 |
EPOXY
BONDING AGENT STANDARDS:
BS 6319 PART 2 1983
BS 6319 PART 7 1985 |
Two
part, prepacked epoxy bonding agent for old to
new concentrate. Can be applied on damp surfaces
Excellent bond strength.
Coverage:
0.3 kg per sq.m. of surface approximately.
|
| |
|
|
| QUICKMAST
566 |
TWO
PART POLYSULPHIDE SEALANT (GUN GRADE) |
High
resistance, to climate extremes and physical damage.
Good resistance to occasional spillage of dilute
acids. Recommended for critical joint sealing
and for sealing structural expansion joints. |
| |
|
|
| CEMPATCH
PRIMER |
PRIMER
FOR CEMENTITIOUS REPAIRS |
Two
part, Acrylic Polymer based bonding agent for
old to new concrete. Excellent bonding strength.
Coverage:
1kg pack covers 3 to 4 sq.m.
|
| |
|
|
CEMPATCH N |
PREPACKED
CEMENTITIOUS REPAIR MORTAR
STANDARDS:
BS 6319 PART 2 1983
BS 6319 PART 7 1985 |
Designed
for cost effective repairs to spalled or damaged
concrete. Resists cracking and shrinkage. Yield:
28 kg pack yields 11.1 litre.
|
| |
|
|
| CEMPATCH
HM |
HIGH
STRENGTH REPAIR MORTAR (MICRO CONCRETE)
|
Non
shrink. Attains ultra high strength low permeability.
Contains no corrosive substances.
Yield:
25 kg + 4.25 litre
water, yields 13.5 litre.
|
| |
|
|
| CEMPATCH
KF |
CRACK FILLING MORTAR
(POLYMER MODIFIED)
|
Non-shrink.
Excellent crack filling ability. Smooth finish.
Prevents Further crack propagation. High tensile
strength.
Coverage: 1
kg will fill approx. 30 - 40 m length of cracks
cut into 6mm deep V-groove. |
| |
|
|
| QUICKMAST
201 |
EPOXY MORTAR |
Excellent
adhesion to most building materials. Excellent resistance
to weathering and chemical attack. Coverage:
9.5 kg pack will cover an area of approximately
0.45 sq.m. at a thickness of 10 mm. |
| |
|
|
| QUICK
MAST 208 |
HIGH
STRENGTH EPOXY REPAIR MORTAR |
High
strength mortar for structural repairs of concrete.
Excellent bonding.
Coverage:
7.5 kg pack covers 0.75 sq.m. |
| |
|
|
| QUICKMAST
348 |
HIGH
STRENGTH EPOXY PATCHING AND VOID FILLING COMPOUND
|
Excellent
bonding with the substrate. No priming required.
Does not shrink on curing and has excellent resistance
to weathering and chemical attack
Yield:
1 kg pack covers 0.5 to 0.6 sq.m. |
| |
|
|
| QUICKMAST
398 |
TWO
COMPONENT POLYESTER REPAIR MORTAR |
An
economical, high strength, two pack, fast setting,
repair compound. Easy to use. Excellent chemical
resistance. Resistance to water and weathering.
Yield:
1kg pack yields 0.5 litre. |
| |
|
|
| SETCURO
WB |
WAX
BASED CONCRETE CURING COMPOUND |
Forms
a non-penetrating continuous film over concrete
surfaces. Permits more efficient cement hydration.
Minimizes drying shrinkage cracks.
Coverage:
5 to 6 sq.m. per litre |
| |
|
|
SETRELEASE
|
MOULD
RELEASE AGENT |
Gives
excellent surface finish. Economical and easy to
use. No stains of oil on concrete surfaces. Coverage:
1 litre diluted with 5 litres of water covers 150-160
sq.m. |
| |
|
|
CEMSIL
|
SILICONE SEALANT |
Superior long term weathering.
UV and ozone resistance. Potential savings in installation and maintenance labour expenditure
|
| |
|
|
