Admixtures
(Chloride free) |
| FLOCRETE
N |
WATER
REDUCER/PLASTICISER STANDARDS:
BS 5075 PART 1
IS 9103
ASTM C-494 TYPE A |
Increases
workability with existing mix. Reduces w/c ratio
by 8 to 10% for given workability. Increases strength
without increase in cement.
Dosage:
0.14 - 0.25 litre per 50 kg cement. |
| |
|
|
| FLOCRETE
HP |
WATER
REDUCER/PLASTICISER STANDARDS:
BS 5075 PART 1
IS 9103
ASTM C-494 TYPE F |
Good
for pumpable concrete and RMC Plants. Increases
workability with existing mix. Reduces w/c ratio
by 12 -15% for given workability.
Dosage:
0.15 - 0.50 litre per 50 kg cement. |
| |
|
|
| SUPAFLO
|
HIGH
RANGE WATER REDUCER (SUPER PLASTICSER)
STANDARDS:
BS 5075 PART 3
IS 9103
ASTM C-494 TYPE F |
Very
high workability resulting in high water reduction
by 15 % to 30%. High quality concrete with accelerated
early strength.
Dosage:
0.30 - 0.60 litre per 50 kg cement. |
| |
|
|
| SUPAFLO
M |
HIGH
RANGE WATER REDUCER (SUPER PLASTICSER)
STANDARDS:
BS 5075 PART 3
IS 9103
ASTM C-494 TYPE F |
Very
high workability resulting in high water reduction
by 10 % to 20%. High quality concrete with accelerated
early strength.
Dosage:
0.30 - 0.60 litre per 50 kg cement. |
| |
|
|
| FLOCRETE
SP |
RETARDING
SUPER PLASTICISER & SLUMP RETAINER
STANDARDS:
BS 5075 PART 3
IS 9103
ASTM C-494 TYPE G
|
Very
high workability. Excellent slump retention time
without excessive retardation of set. Excellent
for pumpable concrete and ready mix plants.
Dosage:
0.20 - 0.65 litre per 50 kg cement. |
| |
|
|
| FLOCRETE
R2 |
RETARDING
PLASTICISER STANDARDS:
BS 5075 PART 1
IS 9103
ASTM C-494 TYPE T |
Extends
setting time. Increased strength due to reduction
in water. Can be used with pumpable concrete and
where cold joints are to be avoided.
Dosage:
0.15 - 0.50 litre per 50 kg cement. |
| |
|
|
| SETCRETE
RMW |
INTEGRAL
WATER PROFING ADMIXTURE FOR CONCRETE STANDARDS:
IS 2645
BS 1881 PART 5 |
Reduces
permeability. Increases workability. Reduces w/c
ratio by 8-10% for given workability. More dense
and water tight concrete and mortar.
Dosage:
0.15 - 0.20 litre per 50 kg cement |
| |
|
|
| FLOCRETE
CF |
CHLORIDE
FREE ACCELERATOR/FROST PROOFER |
Quickens
the setting time and hardening of concrete. Enables
reduction in water-cement ratio. Dosage:
Approximately 1 litre per 50 kg cement. |
| |
|
|
| CEMFROPROOF
(Chloride based) |
ACCELERATING
ADMIXTURE FOR CONCRETE BLOCKS |
Quickens
setting time . Increases workability, makes placing
easier for emergency repair works.
Dosage:
0.60 - 1.7 litres per 50 kg cement. |
| |
|
|
| CEMAIRIN
3 |
AIR
ENTRAINING PLASTICISER |
Introduces
air entrainment in concrete without loss in strength.
Better surface finish.
Dosage:
0.10 - 0.16 litre per 50 kg cement. |
| |
|
|
| TROWELITE
|
HIGH
RANGE MORTAR PLASTICISER
STANDARDS:
BS 4887 PART1 |
High
workability. Gives smooth, creamy mortar even
with harsh sand. Reduces shrinkage cracks. Increases
mortar yield by 10-12%.
Dosage:
0.10 - 0.30 litre per 50 kg cement. |
| |
|
|
| TROWELITE
IP |
MORTAR PLASTICISER IN POWDER FORM
STANDARDS:
BS 4887 PART 1 |
High
workability. Gives smooth, creamy mortar even
with harsh sand Reduces shrinkage cracks Increases
mortar yield by 8-15%
Dosage:
200g per 50 kg cement. |
| |
|
|
| SETCRETE
CF |
NATURAL
FIBRES FOR CONSTRUCTION |
Easy
dispersion. Crack inhibition. Longer open time.
Easier orkability. Better Standability. Less shrinkage
& wastage. Nontoxic. Environmental friendly.
Dosage:
150 g per 50 kg bag of cement. |
| |
|
|
