PRODUCTS LIST |
| ECOPATCH-GP |
REPAIR MORTAR
Compressive Strength:
24-hr: 25 Mpa
7 Days: 35 Mpa
28-days: 40 Mpa
Initial Set 15-minutes
Final Set 30-minute |
Ecopatch GP is an extremely versatile, cementitious, rapid setting, semi leveling structural repair concrete.
Dosage:
For each 25kg use 5 liters of water. After 3 minutes of mixing it will form smooth slurry. At this point extend the mix with gravel at a ratio of 1:1 by weight. |
| |
|
|
| ECOFIL-GP |
CRACK FILLING MORTAR
STANDARDS:
ECOFIL has an approximate working time of 15 minutes at 25C.
|
Ecofil is used to fill cracks in concrete, masonry and plaster surfaces. It can be applied in extreme weather conditions.
Dosage:
ECOFIL should be preferably mixed mechanically using a slow speed drill with paddle attachment, slowly adding 250 gms of ECOFIL to 50 ml of water, until a homogenous mix of smooth, creamy and trowellable consistency is obtained. |
| |
|
|
| ECOPLUG-GP
|
HIGH
RANGE WATER REDUCER (SUPER PLASTICSER)
STANDARDS:
BS 5075 PART 3
IS 9103
ASTM C-494 TYPE F |
Very
high workability resulting in high water reduction
by 15 % to 30%. High quality concrete with accelerated
early strength.
Dosage:
0.30 - 0.60 litre per 50 kg cement. |
| |
|
|
| ECOPLAST-GP |
HIGH
RANGE WATER REDUCER (SUPER PLASTICSER)
STANDARDS:
BS 5075 PART 3
IS 9103
ASTM C-494 TYPE F |
Very
high workability resulting in high water reduction
by 10 % to 20%. High quality concrete with accelerated
early strength.
Dosage:
0.30 - 0.60 litre per 50 kg cement. |
| |
|
|
| ECOTOP-GP |
RETARDING
SUPER PLASTICISER & SLUMP RETAINER
STANDARDS:
BS 5075 PART 3
IS 9103
ASTM C-494 TYPE G
|
Very
high workability. Excellent slump retention time
without excessive retardation of set. Excellent
for pumpable concrete and ready mix plants.
Dosage:
0.20 - 0.65 litre per 50 kg cement. |
| |
|
|
