Industrial
Grouts |
FLOGROUT
40
|
NON-SHRINK,
FREE FLOW, HIGH STRENGTH CEMENTITIOUS GROUT |
General
purpose cementitious grout, Ideal for static loads.
High strength, non-shrink, free flow grout.
Yield:
25kg+ 4.25 litre of water yeilds 1.3.0 litre. |
| |
|
|
| FLOGROUT
60 |
NON-SHRINK,
FREE FLOW, ULTRA HIGH STRENGTH CEMENTITIOUS GROUT
|
Attains
ultra-high strength. Ready to use. Freely flows
under base plates and bolt pockets. Free from
corrosive substances. High early and ultimate
strength. Ideal for dynamic loads.
Yield:
25 kg + 3.75 litre yields 12.8 litres. |
| |
|
|
| FLOADD
|
SUPER
PLASTICISING, EXPANDING GROUT ADDITIVE. |
Produces
non-shrink, easy flowing and more cohesive grout.
Dosage:
200g per 50 kg cement. |
| |
|
|
| QUICKMAST
231 |
EPOXY RESIN GROUT |
Flowable
non-shrink-attains high early and ultimate strength.
Excellent chemical resistance.
Yield:
5 litres approximately per pack.
|
| |
|
|
| KEY-GROUT |
POLYESTER
RESIN ANCHOR GROUT
|
Ultra-high
compressive and pull out strength. Corrosion resistant.Can
be used under water. Rapid setting. |
| |
|
|
| QUICKMAST
471 ZRP |
Zinc rich epoxy primer |
Easy to apply on dry or damp surfaces. Excellent protective properties. Excellent adhesion on substrates such As concrete, reinforcing steel rods, aluminum, mild steel, etc., Excellent over coating characteristics.
|
| |
|
|
